Return To Blog

Steel of a Deal

2013 Continuous Weigh Continuous Mix Plant for Sale

By Andie Rapid - February 21, 2017

February 21, 2017

We present a slightly used 2013 Rapidmix 400CW. This plant is additionally equipped with an admix system AND a mobile control cabin which is appointed with A/C!  All this with only 4030 hours.

Contact us for more information at 303-853-0068.

Twin-Shaft, Continuous Weigh, Continuous Mixing Plant - Pugmill

Rapidmix was designed and developed to be a cost effective method for mixing a wide range of materials in many forms of application as listed below:
* Roller-Compacted Concrete (RCC), for pavement or dams.
* Cement Treated Base (CTB), or Cement Stabilized Base.
* Bentonite enriched soils for lagoons, waste landfills and protective cell linings.
* Sludge solidification for hazardous and non-hazardous waste.
* Contaminated soil stabilization. (Lead, Mercury, etc.)
* Flowable fill. (Materials loaded directly into mixer trucks and charged with water.)
* Soil Cement.
The Rapidmix is totally mobile and completely self-contained. It can be set-up, erected and calibrated usually in about 4 to 6 hours. The Rapidmix is completely self-sufficient with an on-board generator and diesel engine. The machine is electrically driven with the exception of the hydraulic system used for set-up and erection of the equipment.  ​The Rapidmix continuously monitors the in-feeds​ or weight​ of all materials in the mix recipe. ​The aggregate bin may host a removable divider.  A 48-ton silo is capable of up to 60 T.P.H.  ​The ​large ​mixing chamber ​boasts twin-shafts with ​72 Ni-Hard cast paddles which ​run at​ 110 R.P.M. ​that ​insure​​ a homogen​e​ous mix on a consistent basis of ​up to 400-​600 tons per hour.  ​Additionally, the chamber is equipped with Siemens flow meter for your water specs which is supplied by the on-board 1750-liter water tank.  ​The material is then transferred to the 1.5 cu. yd. gob hopper which allows the ability to "hold" material for the next truck to fill.

Continuous Weigh (CW)- Materials are continuously weighed from the aggregate hopper via load cells which weighs the material from the hopper to the mixing chamber.  On route, the material from the silo, is collected in weigh hoppers where the silo material is then delivered to the mixing chamber for an accurately weighed and mixed final product. 
Rapidmix Features:
•  Fully Self Contained
Rapidmix offers a complete plant powered by its owned power source, with on-board compressor and generator.
• Superb Production Rates Offering Increased Profit
Options of 400 or 600 tons per hour output depending on applications. Material feed rates are fully adjustable for the aggregate, cement and water systems.
• Complete Mobile Unit
Unit easily transported on-site as well as from project to project. On-Board hydraulic system changes plant from travel mode to full operational within 2-3 Hours.
• Reliability of Mix Consistency
Integral Operator Station with control panel providing ease of use as well as storing, editing, and retrieving of up to 100 recipes for the proportioning of different materials. In-built twin-shaft mixing chamber offers a consistent high grade of homogeneously mixed material.
Here is a ​Video ​of delivery and set-up