The Rapidmix 400CW twin-shaft continuous mixing plant is also Continuous Weigh (CW). It has been designed to be totally mobile and completely self-contained with its own power source. It is also completely self erecting, using the hydraulic system to change the plant from its travel mode into a fully operational plant in a few hours.
With the Rapidmix continuous weigh (CW) option, materials are continuously weighed from the aggregate hopper via load cells to the twin-shaft mixing chamber. Additionally, the silo is fitted with weigh hoppers, the weighed materials are then delivered to the mixing chamber for an accurately weighed and mixed final product. The final weight is taken from the Belt Scale, on the out-loading conveyor, prior to exiting the plant. The 400 CW model is capable of mixing up to 400 tons per hour depending on application. For a downloadable spec sheet: 400CW
Front Axle - 8,720 Kgs (4410 on Operator Side, 4310 on Tool Box Side)
Middle Axle - 8,770 Kgs (4460 on Operator Side, 4310 on Tool Box Side)
Rear Axle - 8,430 Kgs (4180 on Operator Side, 4250 on Tool Box side)
Construction: Hollow section members fully welded into lattice design with brackets fitted for attaching hydraulic lifting rams, bin, silo, conveyors, mixer, and all ancillary items which make up the plant.
Running Gear: Axle type: Standard tri-axle. Suspension: Single leaf steel spring. Brakes: Standard air operated hub brakes with automatic slack adjusters. Wheels: twin wheels on each hub, (4 per axle total 12 tires) Lights: Rear marker lights, including indicators, brake lights, beacons, and side markers in accordance with regulations.
Access: Walkways are provided along the chassis of the machine for maintenance access. The walkways are constructed from aluminum treadplate with handrails at appropriate locations.
Capacity: 15.6 cu yds (12.0 m3 )
Loading Width: 14 ft 2½ ins (4330 mm). The hopper can be loaded from either side of the machine.
Construction: S275 plate with stiffening ribs. Steep sides for difficult materials. (end slopes of 60 degrees).
Removable Division Plate: The hopper has a removable divider, allowing two materials to be used.
Lining: To aid the discharge of the materials the hopper surfaces are fitted with low friction high molecular polyethylene lining material 1/2” (12mm) thickness).
Adjustable Gates: The outlet end of the hopper is fitted with adjustable gates to vary the ratio of materials and material weight manually.
Belt Feeder: A conveyor boasts a 3 ply 1200 mm (4’) weigh belt fitted at the bottom of the hopper, weighing material from the hopper to the mixing chamber. It is additionally equipped with adjustable rubber skirts and heavy duty support rollers.
TWIN SHAFT CONTINUOUS MIXER
Mixing Action: The twin shafts mix the material at up to 110 r.p.m., while moving the material toward the end of the mixer.
Paddles: The twin horizontal mixing shafts are fitted with 72 Ni-Hard cast paddles, which are intermeshed in a specially phased relationship to optimize mixing action and throughput.
Cleaning and Maintenance Access: Special attention has been paid to give the user maximum access for maintenance and cleaning operations. The top of the mixer is fitted with hinged access covers, which when opened, give access to all of the mixing chamber. Additionally, both sides of the mixing chamber open via hydraulic cylinders.
Drive: The shafts are driven by a 75 kW (100 HP) electric motor through a reduction gearbox with twin gears to synchronize the shafts.
Mixing Chamber: The mixing chamber is formed by fabricated sloped sides with a troughed conveyor under the mixer forming the bottom of the mixer.
Water Addition: Siemens flow meter controls 2 ball valve spray bars fitted into the top of the mixer to allow the water to be added to the material as it progresses along the mixer.
Clean-out/Maintenance Conveyor: Mounted on the bottom of the mixer, forming the bottom of the mixing chamber, this conveyor allows the bottom of the mixer to be easily cleaned, post-production. The mixer should be lined with a bed of material prior to production. The conveyor is fitted with a low speed geared motor drive.
Capacity: 48 US tons based on material being 1500 kg/m3 (93.64 lbs/ft3). Capable of up to 60 t.p.h. throughput.
Construction: Square silo design constructed from all welded box section S275 plate with stiffening ribs.
Access to Roof: The folding access ladder with safety cage is fitted with double tubular handrail and kicking strip. An access hatch is provided on top of the silo.
Silo Venting: Equipped with a 24m2 reverse jet filter. Apressure relief valve is fitted to protect the silo from over-pressurization.
Filling Pipes: (2) 4” (100mm) steel pipes with screwed end for fitting cam locks or other type of delivery hose fitting.
Level Indication: Wam Torex rotating paddle style level indicators for high and low level control.
Weigh System: 2 independent weigh hoppers.
CEMENT BINDER WEIGH VESSEL
Construction: Holding vessel fabricated from mild steel plate, with brackets for load-cells.
Weigh System: 2 independent weigh hoppers providing a charge/discharge flow for accuracey. Screw conveyors are mounted under the weigher. The vessel and screws are weight to monitor the feed rate of the cement. The screws are tubulare mild steel design with end seals and geared motor drive. Each screw feeds into both sides of the mixer ensuring good distribution of materials
Outlet: Twin outlet screw conveyor to discharge the cement or binder into the mixer. Feedrate is measured by recording rate of change of weight observed on loadcells.
Function: Transporting the mixed material from the twin shaft mixer to the truck. The conveyor is designed to handle the maximum feed rate from the mixer. A gob hopper fitted to the top end of the conveyor which allows some mixed material to be “held” for a while, for example: while the next truck drives under for collection.
Construction: Boxed steel construction with mounting brackets for rollers and pivot mechanism. The top section of the conveyor incorporates a folding section for transportation.
Belt: 800mm (31.5”) 3 ply belt with heavy duty top cover and vulcanized joint.
Drive: Motorized drum with rubber lagging.
Belt Scraper: Polyurethane blade pre-cleaner scraper mounted on the face of the head drum.
Gob Hopper: Hopper fitted to the top end of the conveyor with pneumatic discharge doors. Constructed from S275 plate. 1 cu. yd. capacity.
Water Tank: A 1750 litre (462 US gal.) is fitted complete with automatic shut off valve and galvanized steel piping.
Pumps: Two positive displacement pumps are fitted to supply 2 water spray bars within the mixer.
Spray Bars: Each mixer spray bar has a ball valve to allow addition of water early in the mix, later in the mix or both together. A calibration point for accurate water weighing is also included.
Flowmeter: Siemens mag flowmeter accurately measures water dispensed between pumps and mixing chamber.
Compressor: The Rapidmix is equipped with a Hydrovane compressor to provide the air supply for the gob hopper doors and the silo filter.
Valves, Regulator: Solenoid valves are fitted for the control of the gob hopper doors. A lubricator is provided for all pneumatic functions. Additionally, equipped with a regulator and pressure gauge to adjust the pressure as required.
The hydraulic system is used to lift and level the machine, erect the silo and out-loading conveyor. It is also used for opening mixer doors for maintenance and cleaning.
Hydraulic Powerpack: This consists of: electric motor close coupled to a hydraulic pump unit, oil reservoir, return line filter, directional valve, filler/ breather, and level gauge.
Control Valves: Lever operated valves for operating the cylinders.
Hydraulic Cylinders: Double acting cylinders used on: jacking / leveling on 4 of 12 feet, silo elevation, out-loading conveyor fold-out, and mixer sides.
This unit provides electrical power for all machine functions. Diesel powered generating set rated at 200 KVA, 3 phase, 480/277 volts, 60 Hz, 1800 RPM at NTP conditions. Powered by a Volvo Tier 4 Final, 6 cylinder turbo charged diesel engine with directly coupled brushless generator.
Each GenSet features:
Heavy duty fabricated steel skid type base frame with anti-vibration mounting pads.
Electric starting system with heavy duty lead acid batteries and alternator charging system.
High capacity air, fuel and lubricating oil filters.
Fuel feed and return lines from engine to 12 hour capacity baseframe fuel tank.
Industrial exhaust silencer system.
Automatic engine shutdown protection equipment with LCD display for low oil pressure, high engine temperature, low coolant level, overspeed, and fail to start.
Complete circuit breaker enclosure containing ABB 3 pole molded case circuit breaker.
Instruction manuals and electrical wiring diagrams.
PLANT CONTROL SYSTEM
The system uses an Allen Bradley PLC to control all of the plant functions for automatic control with manual backup. A touchscreen operator panel is used for the display of all plant parameters and functions.
Operator Control Panel: Consists of touchscreen buttons which allow automatic or manual control of the following:
Out loading conveyor
Aggregate weigh belt conveyor
Mixer clean out conveyor
Silo filter fan unit
Gob hopper doors
High silo alarm
Low silo alarm
Low water alarm
Alarm mute button
Emergency stop and reset button
Panel live indicator
Generator remote start switch
The operator control panel also houses the following:
PC touchscreen based interface which allows the operator to store, edit and retrieve up to 50 recipes for the proportioning of different materials.
Manual rate meters which display the speed of the in feeds during manual operation.
A thermal printer for printing batch and daily total tickets.
Starter Panels: There are 2 starter panels. Panel 1 for mixer and Panel 2 for all other functions.
Panel 1 is located behind the mixer and houses the contactors, overload relays, timers and current transformers required to start and run the mixer motor using a star / delta sequence.
Panel 2 is located under the operator control panel and houses all contactors, overload relays, MCB’s, Siemens or Emerson inverters, Siemens or Allen Bradley PLC and all other components required to control the plant.
Setup, calibration, and full capacity run at customer site.
Full operating and maintenance reference manuals are supplied with the machine.
*Specs herein refer to plants built since 2015, specs are subject to vary plant to plant due to modifications, upgrades, and special orders.